post Slider

How to Unlock Spectranet & InterC Huawei MiFi Modem (E5573s-606 &E5573s-320)

I’ll make this simple to understand… Just follow me like a mermaid until we reach where we are going. Over the years, unlocking MiFi modems has always been a bone of contention because most network normally lock it to their network… which in other words won’t allow you to use other network chip
Today, I’m going to show you how to unlock Huawei 4G MiFi with Model Number E5573s-320 and E5573s-606 MiFi modem. Spectranet and InterCHuawei  Modem falls within this categories but I’ll urge you to check your MiFi Model very well before you try the below;

Unlocking your Huawei 4G MiFi router with E5573s-320 & E5573s-606 will give you room to use any 4G network sim like ntel, SMILE, Swift InterC etc…without any form of restriction.

Note, if your don’t have the specified Model stipulated above, just pretend like NFA and click on the next post.

>>Huawei Mobile Partner (if you don’t have it, download it HERE)
>>Latest HiLink Drivers (download it here)
>>Latest Huawei HiLink driver V5 (download it here)
>>Huawei E5573s-606 firmware version (download it Here)
>>Huawei E5573s-320 firmware version (download it here)
>>Huawei code calculator (download it here)
>>Universal master code generator (download it here)
>>Make sure your Huawei MiFi Modem (Spectranet, InterC) is fully charged

Follow the Below steps to unlock your device.
Step 1: Unzip the Huawei hiLink drivers that you downloaded above and install them on your PC. Once your installation is complete, reboot your PC so that the drivers can be fully updated with your PC.
Step 2: Unzip and launch the universal master code generator, put in your imei and click on generate
Step 3: Copy the flash code(to notepad) from the imei generated which will serve as your password
Step 4: Insert an unsupported sim into your Huawei E5573s-606 or E5573s-320 router and connect it to your PC via USB cable.

Step 5: Unzip the Huawei E5573s-606 firmware you downloaded and go to the folder where “Prod&Serv&Cust”, run the file P711S-E5-update_21.
Step 6: It will request for password, input the flash code you copied to your notepad as password and hit the ok button. Wait for the installation to finish. At this point, do not disconnect your usb cable, your PC must not shot down or otherwise.

Step 7: Once the process has been successfully completed, extract and launch Huawei code calculator

Step 8: Click on the read tab to generate your unlock code as will be display on the result field

Step 9: Unzip and open the second Huawei E5573s-320 firmware you downloaded earlier, run the E5573_Update_21.
It will update your router firmware and drivers will be installed accordingly. 

Step 10: Once the update is complete, go to your Huawei mobile partner interface, settings select network settings, and pop up to insert your unlock code will appear.

Step 11: Enter the unlock code you generated in step 8 and your Huawei mifi router will be unlocked.

With this, you can rock any 4G network chip in your MiFi router.

Always Remember To Use The Share Buttons,Sharing Is Caring
NEW: Receive our updates directly to your phone now SMSfollow tricksbar to 40404to start Now!!!(SMS is Free)
How to Unlock Spectranet & InterC Huawei MiFi Modem (E5573s-606 &E5573s-320) How to Unlock Spectranet & InterC Huawei MiFi Modem (E5573s-606 &E5573s-320) Reviewed by TricksBar on June 13, 2017 Rating: 5

No comments

comments here

Post AD